Suppliers with verified business licenses
Surface hardness tester for casting/wet mold sand
Model: HT-6510S(A/B/C)
FEATURES
* The Sand Mould Surface Hardness Tester is used to measure the surface hardness of the sand mould/core of the wet mold and provide technical parameters for the formulation of the molding process.
* The surface hardness of sand mold is divided into three types: A, B and C, The common model is type B, among them: Type A: Suitable for the surface hardness test of fine sand mold/core in manual or mechanical low and medium pressure molding. Type B: Suitable for the surface hardness test of fine and coarse sand mold/core in manual or mechanical low and medium pressure molding. Type C: Suitable for the surface hardness test of sand mold in high pressure molding. 2
* The unit of type B hardness tester for sand mold surface is (g/mm ), but it is customary to use hardness H(A/B/C) instead of unit. Because their values are related and consistent, the corresponding hardness value is also large when the 2 unit value is large (g/mm ).
* Low voltage indicator.
* Digital display gives exact reading with no guessing or errors.
* Can communicate with PC for recording, printing and analysing by the optional software and cable for RS232C interface.
* Automatic power off to conserve power.
SPECIFICATIONS
Display: 4 digits, 10 mm LCD
Display Range: 0~100 H(A/B/C)
Measurement Range: 10~90 H(A/B/C)
Resolution: 0.1 H(A/B/C)
Measurement deviation: ≤ ±1H(A/B/C)
PC interface: RS232C interface
Power supply: 2x1.5v AA (UM-3) battery
Operating condition: Temp. 0~40˚C
Humidity <80%
Size: 162x65x28mm (6.4x2.6x1.1inch)
Weight: about 170g
(not including batteries)
Suppliers with verified business licenses